Hello everyone, this is Miracle Watch Pro. The popularity of Greenwich in the world is obvious to all. Recently, MWF continues to launch new Greenwich products: Rolex 116713 Greenwich GMT gold model, satisfying the needs of more watch friends!
This time, MWF launched the GMT116713 gold model. Because the first original mold was completely damaged, I bought another one temporarily, and there will be some differences in the details. However, in the process of comparison, it will still be compared in the form of pictures and texts, and will not avoid the important and focus on the trivial. Although there will be differences in the details of the genuine version, the overall craftsmanship will not have too much deviation. Every model in the future will be presented to watch friends in this way of true and false comparison. If there is any, it will be corrected, and if there is no, it will be encouraged.
In terms of case details, the case exterior is made of 904L, which perfectly restores the entire GMT case shape and corrects the GMT’s circling feel. The crown also shows an embossed crown effect. The 3186 movement is the same as the original. The bottom cover is also the same as the original, polished, brushed, and the bottom of the case is brushed. The fit between the bottom cover and the case is almost the same. The gap between the crown and the case can be compared by yourself. In the inner shadow part, the tail of the letter “R” is corrected for the entire series, and it is slightly raised.
Comparison of the details of the ceramic ring font. The 12 o’clock triangle, top angle, and bottom angle, the sharp corners are all rounded. It is consistent with the original. For the font part, the depth is only one aspect. The original process is that the bottom surface of the font is all perpendicular to the straight body of the font at 90 degrees. To achieve this effect, it can only be molded in one piece. Laser typing will have a series of problems such as beveled edges, rough shading, and collapsed edges. The font depth is consistent with the original, sinking 0.13mm. In addition, the edges of the font are rounded and polished. The electroplating color is also digitally debugged. Most of the ones on the market are pure gold, and the genuine ones are slightly red, which is much more comfortable in terms of appearance.
In terms of the comparison of the word pins, the new version of the square word pins no longer uses the low-lying rounded corner effect. Relatively speaking, the overall height of the word pins is increased, and the outline is more upright, but the edges will still be slightly chamfered. The rounded corners of the word pins are still processed by the above process. Regarding the word pins, it is also a precedent created by MWF. For the first time in the process of mass production, the rounded corners of the word pins are manually polished. In addition, MWF has always adhered to the original factory process, although the original is not so perfect in some parts. For example, the original Rolex luminous is very granular, especially the edge of the word pin, which often has crystals and flashes, because Rolex pursues the ultimate “ice blue” luminous effect. Interested watch friends can understand that MWF uses BGW9 and SL-blue. The gram weight price of these two luminous powders has reached more than 100 US dollars, so it is not filled with luminous powder, and it is not an exaggeration to say that it is “liquid gold”.
The MWF watchmaker also put a lot of effort into the pointer part, including the needle shape, three-dimensional sense, curvature, luminous filling, and the central axis, which has a conical inverted triangle central axis. You can compare the highlight part of the hour hand, the light and dark sides are basically the same, and you can see that its curvature and three-dimensional sense are very similar.
The details on the side of the strap do not leak the steel color. As long as MWF involves inter-gold/full gold styles, the steel color does not leak. This is the bottom line of MWF and the last stubbornness for watch friends who are entangled in precious metal watches. Otherwise, they will not do it. Since they do it, they will do their best. However, the cost and sadness behind it really cannot be expressed in words. The yield rate is really too low. If the steel parts are defective during the assembly process, they can be re-grinded and continued to be used. However, after PVD electroplating, the strap is assembled again. Once bulges and scratches appear, they cannot be refurbished and directly abandoned. Consumables are wasted and the cost of electroplating is increased.
For splicing the head grain, use a three-section head grain, splice, and assemble after electroplating. It fits perfectly. The overall head grain is directly CNC processed. The three-section head grain requires three head grains to assemble the finished product. The process requirements and precision are also extremely high.
The font printing can be enlarged to this multiple. The font is already regular and there is no obvious difference in the font shape. For all kinds of details, MWF has also put in a lot of effort to stick to the original.
Due to the page relationship, the strap part is connected to the above picture. The strap comparison actually answers the questions that everyone is most concerned about. The split head grain does not leak steel color, and the quality continues to use the AR strap. For the fading part, MWF has been shipping for more than a year, and there is no large-scale customer response to the fading problem, because it uses PVD vacuum plating instead of water plating, which is anti-oxidation, strong adhesion, and high cost. So there is no need to worry about quality issues.
Finally, if you like this MWF Greenwich GMT, you can contact Miracle Watch Pro for professional and meticulous shipment inspection and honest and reliable after-sales service!
